Once the soil and rock samples are received in our laboratory, our engineer decides the required type of tests for various samples. All the required tests for each sample are carried out by our lab experts in the laboratory. Our laboratory is equipped with latest machines and support equipments. On the basis of data obtained from various test results, our engineer summarizes all the technical soil parameters and then these are sent to our office for further analysis.
Sieve Analysis
Hydrometer Analysis
Atterberg Limits
Triaxial Shear Test
Direct Shear Test
Consolidation
Proctor Compaction Test
CBR
UCS
Density
Water Absorption
Porosity
Point Load Index
Uniaxial Compressive Test
Specific Gravity
Preparation of Geo-technical Investigation Report
After getting the field bore-logs and laboratory test results, our Geo-technical engineer technically analyzes all the parameters and now analysis for the recommendations is started. As per the requirement of the project as well as client, we make all the analysis and final geo-technical recommendations are prepared for the proposed foundation system. Bearing capacity for all possible type, size and shape of open foundation is calculated and tabulated in the recommendations. Modulus of sub-grade reaction is also estimated for the design of raft. For the pile foundation system, horizontal and vertical pile capacity is calculated and values for different length and dia are tabulated. Analysis for well foundation is provided, wherever it is the requirement of the project. For the purpose of earthquake studies, Liquefaction analysis of each bore-hole at every depth is also carried out by using the latest available research studies.
Apart from all the design soil parameters, we also provide all the supporting calculations as well as graphical presentation in our final report.